How To Light A Gas Water Heater With Electronic Pilot
How To Light A Gas Water Heater With Electronic Pilot. This will allow the flame to ignite. Hold down the pilot button and then press the spark generator.
Cointra supreme 11 ets gas heater. Keep the knob or pilot button pressed down as you relight the burner with a utility lighter. Make sure the switch labeled “pilot” or “on/off” is turned on, then press and hold the electronic pilot light button.
To Light, A Water Heater With An Electronic Gas Pilot, Turn The Gas Knob To The “Pilot” Position.
You will then need to press and hold the igniter button until. I’m afraid the average person would not want to take the time or trouble to light an electronic ignition pilot, whether it is a water heater, boiler, or gas furnace. This will allow the flame to ignite.
Push In The Knob And Hold It In.
Keep the knob or pilot button pressed down as you relight the burner with a utility lighter. However, not all water heaters have a pilot light. Check the pilot light to make sure it is lit and keep holding the smaller, wider button.
Hold Down Th Gas Control Knob And Depress It.
You will need to know how to properly light your electric ignition water heater. You should look for the gas control assembly on your water heater if you are certain it has an electronic pilot (type 1 above). You will hear the clicking sound of the igniter sparking.
Push The Ignite Button Repeatedly If The Furnace Has One.
How to light a water heater with electronic pilot: Then, hold it down while completing the next step. Additionally, some electric water heaters have a.
Cointra Supreme 11 Ets Gas Heater.
If your water heater has a separate button for the. Here are some instructions on. Then you light the pilot light and wait for up to 60 sec for the thermocouple to heat.